User manual

Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual 215

Chapter 6: Tekterm Application

Edit Modes

Newline

When this parameter is disabled (set to “N”), an LF character received from the

host causes the cursor to move down one line in the same column. In addition,

the [ENTER] key transmits a CR. When enabled (set to “Y”), an LF character

received from the host causes the cursor to move to the first column of the next

line. The [ENTER] key transmits both a CR and an LF.

Disable kbd

Setting this parameter to “Y” disables the keyboard and scanner. When this

parameter is set to “N”, the keyboard and scanner are enabled.

DEC Cursor Keys

This parameter can be set to either Cursor Mode or Appl. Mode. Cursor Mode

causes the cursor keys to generate ANSI cursor control sequences. Application

Mode causes the cursor keys to send application control functions.

6.20.1.5 Edit Modes

Auto wrap

If “Auto wrap” is disabled (set to “N”), characters received when the cursor is at the

right edge of the screen replace the previously displayed characters. If “Auto wrap”

is enabled (set to “Y”), the cursor wraps to the next line when the current line is

filled. The display scrolls up if the cursor is at the bottom margin.

Erasure mode

When this parameter is disabled (set to “N”), erase functions can only erase

unprotected characters. When enabled (set to “Y”), the erase functions can

erase characters regardless of their protected state.

Auto wrap N Y/N

Erasure mode N Y/N

Tab stop mode N Y/N

Edit extent Line see text

Disp controls N Y/N

Edit Modes

Range