User manual

Chapter 6: Tekterm Application
Anchor View
218
Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual
6.20.1.8 Anchor View
When enabled (set to “Y”), this parameter locks the display at a defined location on
the screen, preventing it from shifting when the cursor is moved. The “x origin” and
“y origin” coordinates specify where the screen origin, the upper left corner of the
screen, will be fixed.
x origin and y origin
The “x origin” parameter is used to specify the column to which the upper left
corner of the screen will be anchored. The “y origin” parameter is used to specify
the row coordinate to which the screen will be anchored.
6.20.2 TESS Settings
Each session you create has its own “Settings” parameters. Additional TESS
information is documented in “TESS Emulation” on page 161.
Auto Term#
Note: “Auto Term#” is available when 802.IQv2 is assigned to the “Host Conn”
parameter (page 219) or when 802.IQv1 is enabled in the Radio Menu (see
“802.IQ v1” on page 186).
x origin 1 1..24
y origin 1 1..80
Anchor
Range
05
Auto Term # N»
Terminal # 1 see text
Host Conn » see text
Screen » see text
Characters » see text
Tests » see text
Features » see text
Scanner » see text
Fields » see text
Anchor View N» see text
Emulation » see text
TESS
Range
04