User manual

Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual 219
Chapter 6: Tekterm Application
Host Conn.
When this parameter is set to “Y”, a unique unit number is assigned for the current
TESS session. If “Auto Term#” is set to “Y”, any value assigned to the “Terminal #”
parameter is ignored.
Group
When “Auto Term#” is set to “Y”, the ‘Group’ parameter is used to identify the
group or pool of numbers from which an auto-address is chosen.
Terminal #
For every application session you create, the “Terminal #” assigned must be non-
zero and unique. This parameter defines the terminal number for the TESS session
and uniquely identifies all transmissions to and from the 8525/8530.
Other applications running in the 8525/8530, such as an ANSI session or another
TESS session must each have a different number. In addition, each Psion Teklogix
8525/8530 using the radio link must have a unique number.
6.20.2.1 Host Conn.
Conn Type
For TESS applications, this parameter allows you to choose one of the following
types of connections: 802.IQv2, 9010t (TCP Direct), 2392/Telnet, 3274/Telnet,
5250/Telnet and Narrow Band.
Settings
Note: The “Settings” sub-menu is not available when 802.IQv2 is selected as the
“Conn Type”
Group 1 1-5
Range
Auto Term#
Conn Type 802.IQv2 see text
Settings » see text
RangeHost Conn
Host see text
Port 9999 0-9999
Range
Settings