User manual

Chapter 6: Tekterm Application
Fields
230
Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual
Rjct if Alpha
When the cursor is in a numeric field and “Rjct if Alpha” is enabled (set to “Y”),
bar codes containing alphabetic characters are rejected.
Beam Lockout
When enabled (set to “Y”), this parameter disallows scanner use when the current
session is in “LOCK-H” mode.
6.20.2.7 Fields
Field Order
This parameter determines the mode of cursor movement between fields. The next
field can be defined by location on the screen or by the assignment of field numbers.
When enabled (set to “Y”), the cursor moves according to field location. If disabled
(set to “N”), the cursor moves according to the numeric order of the fields.
Enter To F0
The [ENTER] key normally enters data into a field and moves the cursor to the next
field. However, some applications require that the [ENTER] key start a transmission
from the 8525/8530. When enabled (set to “Y”), this parameter causes the [ENTER]
key to be interpreted as [F0] which starts a transmission.
Enter On Arr
When this parameter is enabled (set to “Y”), the arrow keys can be used to complete
data entry into a field.
Field Order Y Y/N
Enter To F0 Y Y/N
Enter On Arrow Y Y/N
Video » see text
All Fld Video Y Y/N
Default Font 16x30 see text
Entry Mode field see text
Open Fky Only N Y/N
Ign Bcode_fld N Y/N
Enh Edit Mode N Y/N
Valid Numerics +-%*/.,$ see text
Range
Fields
05