User manual

Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual 259
Chapter 7: Peripheral Devices & Accessories
Installing The Cradle And Cradle Mounting Plate
• Match the side screw holes on the 8525/8530 with the appropriate pairs
of holes on the cradle and screw them together. The choice of holes
determines the angle at which the terminal tilts.
Figure 7.2 Mounting Cradle And Quick Release
Installing The Cradle Mounting Plate
Next, the cradle mounting plate must be attached to the vehicle. The cradle
mounting plate shown in Figure 7.3 holds the 8525/8530 and cradle in place.
• Screw the cradle mounting plate onto the vehicle using the four 1/4" holes.
Screw Holes
Tabs
10.75 cm
4.25 in.
5.25 c
m
2 in
.
29.8 cm
11.45 in.
Front
Back
Q
uick Release
Fasteners