User manual

Chapter 7: Peripheral Devices & Accessories
Installing The Cradle And Cradle Mounting Plate
260
Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual
Note: The bolts used for all installations are SAE 1/4-20.
Figure 7.3 The Cradle Mounting Plate
Attaching The Cradle To The Cradle Mounting Plate
Next, the 8525/8530 and cradle must be attached to the cradle mounting plate.
• Align the tabs on the front of the cradle to the tab guides on the mounting
plate and push the cradle back and down.
• Slide the fasteners on the back of the cradle until they snap to the posts on
the mounting plate.
Warning: Never operate the vehicle if the quick release fasteners are
not locked.
Post
Tab
Guide
s
25.4 cm
10.0 in.
Front
Back
13 cm
5 in.