User manual

Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual C-1
APPENDIX C
USB SETUP APPLICATION
C.1 USB Setup
The USB Setup application (PN 1000997) is used to update a Windows PC so that it
can connect to a Psion Teklogix 8525.
System Requirements
• Windows® 2000 or XP
• ActiveSync 3.1 or later
The two driver classes that control USB communication are usbstor (for commu-
nication with a device running BooSt) and wceusbsh (for communication
through ActiveSync with a device running Windows CE .NET). These drivers must
be updated with 8525-specific information so that the 8525 can be recognized by
your PC.
The install program:
• updates copies of the device installation scripts usbstor.inf and
wceusbsh.inf with Psion Teklogix-specific information,
• sets up a USB connection between the PC and the 8525, and
• installs the 8525 as a device on your PC. This may require notifying the
PC OS that the device should be reinstalled and then reconnecting the
USB device.
C.1.1 Launching The Application
The log file is initialized and the program introduction is written to it.