User manual

Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual 27
Chapter 2: Basic Checkout
Changing Network Properties
2.4.4.3 Changing Network Properties
To change the properties of an existing preferred network:
• Highlight the network that you want to modify.
• Tap the Properties button, and press [ENTER].
• Make any necessary changes in the Wireless Properties dialog box, and
press [ENTER] to save the changes.
Note: You do not need to reset your 8525/8530 after configuring the radio.
2.5 Calibrating The Touchscreen
Before using your 8525/8530, you will need to calibrate the touchscreen. Refer to
“Calibrating The Touchscreen” on page 38 for details.
2.6 Resetting The 8525/8530 Vehicle-Mount
Important: Because Psion Teklogix cannot guarantee what has been saved
(registry) after a reset, this should be considered as a last resort.
To reset the 8525/8530:
• Press and hold down the [BLUE] key and the [ENTER/ON] key simulta-
neously for a minimum of six seconds.
A reset results in a complete reboot of the unit. All RAM memory contents are lost.
While it is most likely that the contents of the flash memory and memory card will
be preserved, Psion Teklogix cannot guarantee this.
Note: On the 8530, pressing and holding down the ‘on/off’ switch on the right
side of the unit down for 10 or more seconds resets the vehicle-mount.