User manual

Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual 49
Chapter 3: Getting To Know Your 8525/8530
General Maintenance
To install ActiveSync, follow the step-by-step instructions provided with the
program’s setup wizard. Refer to the following website for details:
http://www.microsoft.com/windowsmobile/resources/downloads/pocketpc/activesync35.mspx
Note: You’ll need you need to run usbsetup.exe to configure Windows to recog-
nize the 8525/8530. For information about this USB application, refer to
Appendix C: USB Setup Application.
3.11 General Maintenance
3.11.1 Caring For The Touchscreen
The top of the touchscreen is a thin, flexible polyester plastic sheet with a conductive
coating on the inside. The polyester can be permanently damaged by harsh chemicals
and is susceptible to abrasions and scratches. Using sharp objects on the touchscreen
can scratch or cut the plastic, or crack the internal conductive coating.
If the touchscreen is used in harsh environments, consider applying a disposable
screen protector (PN 1008009). These covers reduce the clarity of the display
slightly but will dramatically extend the useful life of the touchscreen. When they
become scratched and abraded, they are easily removed and replaced.
The chemicals listed below must not come into contact with the touchscreen:
• mustard, ketchup,
• sodium hydroxide,
• concentrated caustic solutions,
• benzyl alcohol, and
• concentrated acids.
3.11.2 Cleaning The 8525/8530
Important: Do not immerse the unit in water. Dampen a soft cloth with mild
detergent to wipe the unit clean.
•Use only mild detergent or soapy water to clean the vehicle-mount unit.
• Avoid abrasive cleaners, solvents or strong chemicals for cleaning.
• To clean ink marks from the keypad and touchscreen, use isopropyl alcohol.