User manual

Psion Teklogix WAPro Vehicle Cradle User Manual10
4.0 Using The Vehicle Cradle
If your WORKABOUT PRO is equipped with a protective
carrying case or other such case, these accessories need to be
removed before installing the unit in the Vehicle Cradle. There
is no need to remove handstraps, pistol grips or tethered devices
from the unit.
The correct installation places the computer in the cradle to the
point where resistance is met and then presses the cradle down
through the resistance into the locking position.
Removal remains the same process as in the manual.
Push the release button to the rear, the computer moves upward.
Then lift. (Figure 4.1)