netpad Windows CE .NET 4.2 Quick Start Guide May 27, 2004 ISO 9001 Certified Quality Management System P/N 8000022.
© Copyright 2004 by Psion Teklogix Inc., Mississauga, Ontario, Canada This document and the information it contains is the property of Psion Teklogix Inc., is issued in strict confidence, and is not to be reproduced or copied, in whole or in part, except for the sole purpose of promoting the sale of Psion Teklogix manufactured goods and services.
Return-To-Factory Warranty Psion Teklogix warrants a return-to-factory warranty for a period of one year. In some regions, the warranty exceeds this period. Please contact your local Psion Teklogix office for details. For a list of offices, see “Worldwide Offices” on page 58. The warranty on Psion Teklogix manufactured equipment does not extend to any product that has been tampered with, altered, or repaired by any person other than an employee of an authorized Psion Teklogix service organization.
Table Of Contents Program License Agreement . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Approvals And Safety Summary . . . . . . . . . . . . . . . . . . . . . . . 5 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 1.1 Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 1.1.1 Windows CE .NET . . . . . . . . . . . . . . . . . . . . . . . 17 1.1.2 Applications Installed On The netpad . . . . . . . . 17 1.1.
2.8.1 Keypad Assignments . . . . . . . . . . . . . . . . . . . . . 45 2.9 How To Reset The netpad. . . . . . . . . . . . . . . . . . . . . . . 46 2.10 The Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 2.11 First Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 2.11.1 Navigating Between Files And Folders . . . . . . 49 2.11.2 Starting Programs . . . . . . . . . . . . . . . . . . . . . . . 50 2.11.3 Programs And Files . . . . . . . . . . . . . . . . . .
Program License Agreement Microsoft®’s End User License Agreement You have acquired a device (“DEVICE”) that includes software licensed by Psion Teklogix Inc. from Microsoft Licensing Inc. or its affiliates (‘MS”). Those installed software products of MS origin, as well as associated media, printed materials, and “online” or electronic documentation (“SOFTWARE”) are protected by international intellectual property laws and treaties. The SOFTWARE is licensed, not sold. All rights reserved.
• • • • • 4 THE SOFTWARE OR AGAINST INFRINGEMENT. IF YOU HAVE RECEIVED ANY WARRANTIES REGARDING THE DEVICE OR THE SOFTWARE, THOSE WARRANTIES DO NOT ORIGINATE FROM, AND ARE NOT BINDING ON, MS. Note on Java Support. The SOFTWARE may contain support for programs written in Java.
Approvals And Safety Summary CE Declaration Of Conformity Product: netpad 1000 Series with Serial Docking Station Application of Council Directives: EMC Directive: 89/336/EEC Low Voltage Directive: 73/23/EEC Conformity Declared to Standards: EN 55022: 1998; Class B; EN 55024: 1998; EN 61000-4-2; ±4kV CD; ±8kV AD EN 61000-4-3; 3V/m, 80-1000 MHz, 900 MHz EN 61000-4-4; ±1kV Power lines EN 61000-4-5; ±2kV Common; ±1kV Differential mode EN 61000-4-6; 3VRMS, 150 kHz-80 MHz EN 61000-4-11; AC Mains Ports EN 61000
CE Declaration Of Conformity Product: netpad 3000 Series with Serial Docking Station Application of Council Directives: EMC Directive: 89/336/EEC Low Voltage Directive: 73/23/EEC Conformity Declared to Standards: EN 55022: 1998; Class B; EN 55024: 1998; EN 61000-4-2; ±4kV CD; ±8kV AD EN 61000-4-3; 3V/m, 80-1000 MHz, 900 MHz EN 61000-4-4; ±1kV Power lines EN 61000-4-5; ±2kV Common; ±1kV Differential mode EN 61000-4-6; 3VRMS, 150 kHz-80 MHz EN 61000-4-11; AC Mains Ports EN 61000-3-2; EN 61000-3-3 EN 60950:
FCC Information For The USA FCC Declaration Of Conformity (DoC) Applicant’s Name & Address: US Representative’s Name & Address: PSION TEKLOGIX INC. 2100 Meadowvale Blvd. Mississauga, Ontario, Canada L5N 7J9 Tel.: (905) 813-9900 Psion Teklogix Corp. 1810 Airport Exchange Blvd., Suite 500 Erlanger, Kentucky, 41018, USA Tel.: (859) 371-6006 Equipment Type / Environment: Computing Devices for Home and Office Use Trade Name / Model No.
CE Marking When used in a residential, commercial or light industrial environment the product and its approved UK and European peripherals fulfil all requirements for CE marking. R&TTE Directive 1999/5/EC This equipment complies with the essential requirements of EU Directive 1999/5/EC (Declaration available: www.psionteklogix.com). Cet équipement est conforme aux principales caractéristiques définies dans la Directive européenne RTTE 1999/5/CE. (Déclaration disponible sur le site: www.psionteklogix.com).
Deze apparatuur voldoet aan de noodzakelijke vereisten van EUrichtlijn betreffende radioapparatuur en telecommunicatie-eindapparatuur 199/5/EG. (verklaring beschikbaar: www.psionteklogix.com). Dette udstyr opfylder de Væsentlige krav i EU's direktiv 1999/5/EC om Radio- og teleterminaludstyr. (Erklæring findes på: www.psionteklogix.com). Dette utstyret er i overensstemmelse med hovedkravene i R&TTEdirektivet (1999/5/EC) fra EU. (Erklæring finnes på: www.psionteklogix.com).
FCC Information To The User Radio And Television Interference This equipment radiates radio frequency energy and if not used properly—that is, in strict accordance with the instructions in this manual—may cause interference to radio communications and television reception. It has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2.
Identify and Resolve Radio-TV Interference Problems”. This booklet is available from the US Government Printing Office, Washington, DC 20402 - Stock No 004-000-00345-4. Radio Frequency Emissions Do not use in aircraft or hospitals. Some equipment in hospitals and aircraft are not shielded from radio frequency energy. Do not use the netpad onboard aircraft, or in hospitals, without first obtaining permission. Do not use near pacemakers.
Important Safety Instructions This equipment was tested for FCC compliance under conditions that included the use of shielded cables and connectors between it and the peripherals. It is important that you use shielded cable and connectors to reduce the possibility of causing radio and television interference. Shielded cables, suitable for the netpad, can be obtained from an authorised Psion Teklogix dealer.
Integrated Scanner Safety For your own safety, it is critical that you comply with the warnings described in “The Scanner” on page 48. Battery Safety Precautions CAUTION! Danger of explosion if a netpad battery is incorrectly handled, charged, disposed of or replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the instructions described in “Lithium-Ion Battery Safety Precautions”, below.
BATTERIES ARE CONSIDERED HAZARDOUS WASTE. Used batteries must be disposed of in accordance with the manufacturer’s instructions, taken to an appropriate local battery recycling facility, or returned to one of the following Psion Teklogix offices for proper disposal. Psion Teklogix Inc. 2100 Meadowvale Blvd. Mississauga, Ontario Canada L5N 7J9 Psion Teklogix Corp. 1810 Airport Exchange Blvd. Suite 500 Erlanger, Kentucky USA 41018 Psion Teklogix S.A. Parc Club Du Golf-Bat 1.
• Do not short-circuit the battery by directly connecting any of the exposed terminals with metal objects such as wire. Do not transport or store the battery together with metal objects such as necklaces, hair pins, etc. • Do not use or leave the battery near a heat source such as a fire or heater. • Do not immerse the battery in water. • When charging, use the battery charger specifically designed for the battery.
• If a battery should leak, do not allow the contents to come into contact with your skin or your eyes. If it does, wash immediately with plenty of cold water and seek medical advice. • Do not store the battery in extremely high temperatures (e.g., a vehicle, strong direct sunlight, etc.). This may cause the battery to overheat or ignite, and it may also reduce the performance and service life of the battery. • Do not use in areas where static electricity is greater than what the manufacturer guarantees.
1. Introduction This guide provides information on the operation and features of the Psion Teklogix netpad. For additional information, refer to the netpad User Manual, the online help, or the documentation supplied with the application you are using. 1.1 Software 1.1.1 Windows CE .NET Windows® CE .NET is an operating system with ease of application integration, comprehensive application development tools and a growing set of connected capabilities. Windows CE .
1.1.3 About ActiveSync The Microsoft® PC connectivity software, ActiveSync, can be used to connect the netpad to PCs running Windows® 95/98/2000/ME or NT 4.0. By connecting the netpad to a PC with a cable and running ActiveSync on the PC, you can: • View your netpad files from Windows Explorer by using the Mobile Device icon in the PC’s My Computer window.
of any object, other than the approved stylus, may result in damage to the netpad screen. To maintain the life of the netpad screen, keep the screen clean. To clean the screen: switch off the netpad and use a soft, clean, dry cloth to gently wipe the screen. (If the netpad is set to turn on automatically when the screen is tapped, you should turn this preference off before cleaning the screen.) Warning: Under no circumstances use chemical solvents to clean the screen.
The backup battery is not user replaceable. If the backup battery requires replacement the netpad must be returned to a Psion Teklogix approved service centre. Drop Rating The netpad is designed to survive being dropped on any face, onto concrete, from a height of 1.5 m (5 ft.). Dropping the netpad from greater heights or onto harder surfaces may result in damage to the netpad. IP Rating The netpad is rated to IP67 and can survive submersion in water to a depth of 1 m (3.3 ft.) for up to 30 minutes.
Storage Temperature The netpad is designed to be stored within the temperature ranges of -25°C to +70°C (-13°F to 158°F); and -25°C to +60°C (-13°F to 140°F) for scanner variants. Storage of the netpad outside of these temperature limits may reduce its life. To prolong the life of the netpad battery packs during normal storage, store the netpad (and the battery pack) between +10°C and +35°C (+50°F and +95°F).
2. Getting Started 2.1 Features Of The netpad This netpad is a Windows® CE .NET OS-based mobile tablet computer with a 1/2 VGA touch-sensitive screen. netpad is lightweight, shock and water-resistant, and designed for use in a wide range of business areas including field service, field sales, transport, health care, hospitality, manufacturing and insurance. It is available in variants with internal GSM/GPRS, Bluetooth, and 802.11b radios, and scanners. Figure 2.
Figure 2.2 Back Of netpad 2.2 Preparing The netpad For Use 2.2.1 Fitting The Antenna For some netpad models fitted with either the GPRS or 802.11b radio, the antenna must be installed. The antenna should be installed as shown in Figure 2.3 on page 24. To install the antenna turn it counter clockwise; to remove the antenna turn it clockwise.
Figure 2.3 Antenna Insertion And Removal 2.2.2 Use Of The Soft Protective Case Figure 2.4 Insertion Of netpad In Case Important: The netpad and protective case have been tested to ensure compliance with the latest FCC RF exposure guidelines. For continued compliance when using the netpad and case combination, the face shown should be fitted against the body! The user must not modify the case in any way. 24 Psion Teklogix netpad Windows CE .NET 4.
Figure 2.5 Protective Case Position On Body 2.3 Power Management The netpad is powered by a Lithium Ion rechargeable battery pack, which under optimal operating conditions will provide power for a full shift (for details, see the netpad User Manual). The netpad can be powered from AC when used in the docking station (see page 55). When the netpad is powered from the docking station, it will also charge the battery pack. Note: How long your batteries last will depend upon how you use your netpad.
during the Suspend state (see page 35). • Use files on the internal disk instead of an MMC, as the netpad requires more power to write to the multimedia card. • Turn Flight Mode ON to conserve power when radio communications or the PCMCIA card are not needed (see “Flight Mode Settings” on page 37). 2.3.1 Battery Care Fitting The Battery Before you can use the netpad you must fit the battery—slide it into place until it clicks, as shown in Figure 2.6 on page 27.
Changing Battery Packs If you are using your netpad away from the charger and a spare battery pack is available, you can change batteries when the battery warning is displayed. To do this: 1. Switch the netpad off. 2. Press on the battery pack latch to remove it. 3. Push in the replacement battery pack (see Figure 2.6). Important: Always switch off the netpad before removing the main battery. Never remove the battery from the netpad while it is in the docking station.
Prolonging Battery Life When your netpad is switched off, it is on “Suspend” and will continue to use a small amount of battery power. If you are going to leave your netpad switched off for a long period of time, you are advised to back up your data beforehand because the batteries will eventually run out. Details on battery usage and life are available in the netpad User Manual.
power icon in the taskbar (this icon changes depending on power status, as described in Table 2.1). The Power Properties menu tabs allow you to access the Main and Internal Battery status screens, power saving Schemes, Battery Settings, and the Device Status screen. Note: The Power Properties menus are designed to allow users to set the optimal power management settings that will deliver the best battery life performance for a given usage scenario. Refer to the netpad User Manual for examples.
Main Battery To check the battery power status, click on the Main Battery tab. As shown in Figure 2.7, this screen describes the main battery and its state. Figure 2.7 Power Properties: Main Battery Internal Battery The internal battery provides temporary backup of data on the terminal while the main battery is being replaced. To check the internal battery power status, click on the Internal Battery tab. This screen describes the state of the internal battery, its voltage, and its type. Figure 2.
Power Saving Schemes The Schemes tab accesses the power states: Dim, Stand-By and Suspend. These states can be enabled after an elapsed time range, that can be set depending on whether the netpad is on battery power or external power. Figure 2.
the timeouts should be kept to a minimum to help conserve battery life. The least amount of power is consumed during the Suspend state. Setting any of these timeouts to Never does not affect the other timeout options, but will adversely affect the battery run time. If all three timeouts are set to Never, the netpad will remain on. To further reduce power consumption, carefully consider the duration of time that the display backlight is ON or turned up (see “Backlight Properties” on page 44).
Inactivity Timer Based On Last This parameter allows you to choose what type of event is monitored by Power Management. If you select User Event, the Inactivity Timer for switching into Stand-By or Suspend is started from the last time you press a Navigation button, a function key, or use the touchscreen. “System Events” include activity on the serial port, an active radio session, IrDA activity, or an active application.
Figure 2.11 Power Schemes: Dim Switch To Stand-By In Stand-By state, the netpad turns off the display, but the programs and netpad hardware remain active. Stand-By is activated when the time specified in the Switch to Dim and the Switch to Stand-By options have elapsed without any activity. The netpad then begins to monitor the Suspend time. Press the power button to put the netpad into Stand-By state. Press the button again to wake up the unit. Figure 2.
Switch to Suspend Once the time specified in the Dim and the Stand-By states have elapsed, the netpad begins to count down the time specified in the Switch to Suspend option (see Figure 2.13). When the time in the Suspend option elapses, the unit enters Suspend state. In Suspend state, the netpad CPU suspends all activity, turns off the display, and goes into a low power state. The state of the device (RAM contents) is preserved.
Battery Settings This screen allows you to check the current status of the battery and to configure the battery settings so that the netpad will warn you when the main battery charge is low. Figure 2.14 Power Properties: Battery Settings To set the Battery Suspend Threshold, click on the Battery Settings tab. The available settings are set on a sliding scale, and range from 20 to 70%. The Battery Suspend Threshold value confirms the setting made on the sliding scale.
are: D0 (active), D1 (Dim), D2 (Stand-By), D3 and D4 (Suspend), and Power loss (no power). The device names are represented as follows: \Windows\sa_lcd2.dll Display proxy driver, which interfaces the display driver to the power manager. NDS0 NDIS driver. PWR1 Power button, which passively supports power management to control the system power states. Figure 2.15 Power Properties: Device Status 2.3.3 Flight Mode Settings Flight Mode turns off the PCMCIA card in your netpad. This mode serves two purposes.
When enabled, an airplane icon will appear in the taskbar. Note: Remember to turn Flight Mode OFF when the radio or PCMCIA card is needed. To open Flight Mode Settings in order to disable it, click on the airplane icon in the taskbar. Figure 2.16 Flight Mode Settings 2.4 Multimedia Cards Multimedia cards (MMCs) are non-volatile memory cards, which fit into a dedicated slot in the netpad and can be used to store application software and/or data.
• To remove an MMC, open the door and push the card. Store your MMC safely, particularly if it contains valuable data. Card Slot Door Latch MMC Card Reset Button Figure 2.17 MMC Slot Location 2.5 Installing And Removing The Sim Card A netpad fitted with a GSM/GPRS radio requires a Subscriber Identity Module (SIM) card installed in order for the netpad to access the GSM network. The SIM card fits into a dedicated slot in the netpad. The SIM card slot is used solely for GSM-equipped netpads.
Orientation of netpad (screen side up) MMC SIM Card Card Slot Door Figure 2.18 Location Of SIM Card And MMC Important: The MMC slot and SIM card slot are located very close together. When inserting or removing the SIM card be careful not to drop the SIM card into the MMC slot. 2.5.1 Inserting The SIM Card Warning: To prevent damage to the SIM card, ensure that the netpad is switched off and the battery removed before inserting the SIM card. • Remove the battery pack from the netpad.
MMC SIM Card Orientation of Card (notched corner) SIM Card Slot Figure 2.19 Insertion Of SIM Card Important: Ensure that the SIM card is inserted in the correct orientation as shown. Once inserted, the SIM card can only be removed using a pair of tweezers or longnosed pliers. If the SIM card is inserted incorrectly, the unit will not connect to the GSM network. If the SIM card is inserted incorrectly, it must be removed by following the instructions in “Removing The SIM Card”, below. 2.5.
Cross-hatched Area of SIM Card (grip here with pliers) Orientation of netpad (screen side down) MMC Figure 2.20 Removal Of SIM Card 2.6 Turning On And Off To switch on: press the On/Off button on the top. Note: If the serial cable is connected to the PC and the netpad, the netpad will automatically switch on when ActiveSync on the PC is searching for a connection. To switch off: press and hold the On/Off button until the screen goes dark. This suspends the netpad.
with a file on the MMC, save the file before switching off the netpad and removing the card. Note: If you do not use the netpad, it will automatically switch off after a few minutes to save battery power. To continue using the netpad where you left off, switch the netpad on again using the On/Off button. See “Power Management” on page 25 for information on power setting options. 2.7 Finding And Using The Stylus The stylus is located in a holder at the right.
2.8 The Command Icons, Control Panel, And Toolbar The netpad screen has a column of permanent “command icons” on the far right-hand side of the display. Some of these are user-configurable via the Soft Keypad Settings icon in the Control Panel (for details see the netpad User Manual). From top to bottom, these are the defaults for the soft keys: Start Menu: This icon is user-definable. Left-clicking displays the Control Panel (for the Control Panel screen, see Figure 2.21 on page 45).
System command icon: Left-clicking displays the Windows CE .NET Start Menu. Right-clicking displays the Soft Keypad Settings menu, which is also accessed through the Control Panel. Figure 2.21 Control Panel 2.8.1 Keypad Assignments The Keypad Assignments menu is used to specify how the programmable keys act. The menu is displayed through the Keypad Assignments icon in the Control Panel.
2.9 How To Reset The netpad If you find that you can’t exit a program normally, right-click on the taskbar and select Task Manager from the context menu. Select the task that appears to be unresponsive and click on the End Task button. If this does not work, or if your netpad appears to have “locked up”, you can always perform a “soft reset”. This should restart your netpad while preserving most of your information.
changes to open files will be lost. Your other files on the internal disk will almost always be safe. It is possible (although unlikely) that performing a soft reset after a program failure may cause the netpad to lose the information on the internal disk; it could even prevent the reset from working at all. If this happens, you will have to perform a “hard reset”. Important: A hard reset resets the netpad completely, and all information on the Internal disk will be lost.
2.10 The Scanner Where fitted with a bar code scanner, the netpad may be used to read industry standard bar codes. To scan a bar code, point the scanner window at the bar code, ensuring that the scanner window is not obstructed and that you are between 5 cm (2 in.) and 60 cm (24 in.) from the bar code. Activate the scanner as instructed in the software application’s operating instructions. The scanning beam should be energized until a successful decode is achieved or three seconds have elapsed.
1040.10, 1040.11 and DIN EN 60825-1: January 2001, and is classified as a Class 2 laser product. 3. CAUTION – Using controls or adjustments, or performing procedures other than those specified herein may result in hazardous radiation exposure. 4. CAUTION – The use of optical instruments with this product will increase eye hazard. 2.11 First Steps When you first switch on the netpad, you will see the Calibration screen. You must calibrate successfully to continue.
2.11.2 Starting Programs When you open a file, the correct program for this file is started automatically. You can also start programs by clicking on them from the Start Menu. You don’t have to close one program before opening another. The taskbar displays all open applications. 2.11.3 Programs And Files To create a new file: open the program, select the New command on the File menu and type in the name for the new file (see “Entering Information”, below). The file will now be created.
To move the keyboard, drag it by the title bar. The on-screen English language keyboard is the netpad’s default keyboard. To choose the language keyboard to use, and to set the keyboard preferences, go to the Control Panel and open the Input Panel icon. This will open the Input Panel Properties menu. The dropdown menu will show all available keyboards. Clicking on the Options button will let you set such preferences as button size and special gestures for use with the keyboard.
2.11.5 Using Menus You can usually select a menu command to perform tasks. • Click on the menu you want to access from the menu bar. • Tap on the menu names and commands, or use the arrow keys to move around the menus. Tap on commands marked with a or press the right arrow key to see further commands. A menu command with three dots at the end means that selecting the command will display a “dialogue” where you enter more information (see “Using Dialogues”, below).
Checkbox: where you make a choice between selecting an option or not selecting it. Just tap on the checkbox, or press the left and right arrow keys to add or remove a checkmark. Radio buttons: where you make one choice from a number of options. Just tap on an option, or use the left and right arrow keys to make a selection. If an item is grey, it is currently not available. For example, if you do not have a transflective display, the Backlight On checkbox in Backlight Properties will be greyed out.
Dialogue Buttons Dialogues usually include standard buttons such as Ok and X. Some buttons have a standard keypress equivalent: • Usually, you can click on the OK button or press the Enter key if you want to save information and remove the dialogue. • Click on the Cancel button, the X button, or press the Esc key if you want to close the dialogue without saving the information.
3. The netpad Docking Station This section describes the netpad docking station. The docking station is used as a convenient “drop-in” holder for the netpad, supplying power for device operation, battery charging, and communications. 3.1 Using The Docking Station The netpad docking station provides a permanently connected holder for the netpad. The power jack is on the front and the serial communication sockets are situated at the right of the docking station.
To insert the netpad into the docking station, align the two devices, and press down on the netpad until the connection is made. To eject, press down on the release button at the top of the docking station. The netpad will be pushed up and out of the docking station. While the netpad is in the docking station, the communications port on the netpad can still be used. The docking station communications port is also available for convenience. You can rotate the orientation of the docking station on its stand.
4. Support Services And Worldwide Offices Psion Teklogix provides a complete range of product support services to its customers worldwide. These services include technical support and product repairs. 4.1 Technical Support Technical Support for Mobile Computing Products is provided via e-mail through the Psion Teklogix customer and partner extranets. To reach the website, go to www.psionteklogix.com and click on the appropriate Teknet link on the home page.
4.3 Worldwide Offices COMPANY HEADQUARTERS AND CANADIAN SERVICE CENTRE Psion Teklogix Inc. 2100 Meadowvale Blvd. Mississauga, Ontario Canada L5N 7J9 Tel: +1 905 813 9900 Fax: +1 905 812 6300 E-mail: salescdn@psion.com NORTH AMERICAN HEADQUARTERS AND U.S. SERVICE CENTRE Psion Teklogix Corp. 1810 Airport Exchange Boulevard Suite 500 Erlanger, Kentucky USA 41018 Tel: +1 859 371 6006 Fax: +1 859 371 6422 E-mail: salesusa@psion.
Psion Teklogix (UK) Ltd. Bourne End Business Centre Cores End Road Bourne End Buckinghamshire SL8 5AR, England Tel: +44 1628 648800 Fax: +44 1628 648810 WWW: www.teklogix.co.uk E-mail: tekuk@psion.com Psion Teklogix Finland Metsänneidonkuja 8 02130 Espoo Finland Tel: +358 9 4307 8390 Fax: +358 9 4307 8395 E-mail: tekeuro@psion.com Psion Teklogix Italia S.r.I Via Galilei, 47 20092 Cinisello Balsamo Milan, Italy Tel: +39 2 6604 5410 Fax: +39 2 6604 5412 E-mail: tkxitalia@psion.com Psion Asia Pacific Pte. Ltd.
Psion Teklogix Africa Postnet Suite 39, Private Bag x11 Halfwayhouse, 1685 Ground Floor East Waterfall Edge Phase 2, Waterfall Park Bekker Road MIDRAND 1685 South Africa Tel: +27 11 805 7440/1/2 Fax: +27 11 805 7444 Psion Teklogix Wireless Technologies (Shanghai) Ltd. Unit 1507-08 Mingshen Building No.3131 Kai Xuan Rd Shanghai 200030 China Tel: +86 21 5407 1991 Fax: +86 21 5407 1992 Psion Teklogix Systems India Pvt. Ltd.
