User manual

26 Psion Teklogix netpad Windows CE .NET 4.2 Quick Start Guide
during the Suspend state (see page 35).
• Use files on the internal disk instead of an MMC, as the
netpad requires more power to write to the multimedia
card.
• Turn Flight Mode ON to conserve power when radio
communications or the PCMCIA card are not needed
(see “Flight Mode Settings” on page 37).
2.3.1 Battery Care
Fitting The Battery
Before you can use the netpad you must fit the battery—slide it into
place until it clicks, as shown in Figure 2.6 on page 27.
Important: Take care when replacing batteries! Always switch
off the netpad before removing the main battery.
The netpad will warn you when its main battery is
getting low, in plenty of time to change/charge it. The
backup battery is designed to maintain the memory
for several hours. However, prolonged reliance on
the backup battery does reduce its life.
Charging The netpad Battery Pack
To charge the battery, attach the battery pack to the netpad and place
the complete netpad in a netpad docking station (for instructions,
please refer to page 55), or place the battery in one of the optional
battery chargers. The standard (1800 mAh) netpad battery will nor-
mally be fully charged within 4 hours.