User manual

Psion Teklogix netpad Windows CE .NET 4.2 Quick Start Guide 39
• To remove an MMC, open the door and push the card. Store
your MMC safely, particularly if it contains valuable data.
Figure 2.17 MMC Slot Location
2.5 Installing And Removing The Sim Card
A netpad fitted with a GSM/GPRS radio requires a Subscriber Iden-
tity Module (SIM) card installed in order for the netpad to access the
GSM network. The SIM card fits into a dedicated slot in the netpad.
The SIM card slot is used solely for GSM-equipped netpads.
The SIM card slot is located behind the Card Slot door on the right-
hand side of the netpad; and is located below the Multimedia card
(MMC) slot (see Figure 2.18 on page 40).
Card Slot Door Latch
MMC Card
Reset
Button