User manual

Psion Teklogix netpad Windows CE .NET 4.2 Quick Start Guide 43
with a file on the MMC, save the file before switching off the
netpad and removing the card.
Note: If you do not use the netpad, it will automatically switch off
after a few minutes to save battery power. To continue using
the netpad where you left off, switch the netpad on again
using the On/Off button. See “Power Management” on
page 25 for information on power setting options.
2.7 Finding And Using The Stylus
The stylus is located in a holder at the right. To remove it, slide the
stylus out of the top of the netpad. To replace it, push it back in. Tap
lightly on the screen using the stylus. You can use your fingers to tap
on the screen, though it is best to use the stylus to avoid fingerprints
or smudges on the screen.
Do not tap the screen with any object that has a sharp tip or you may
damage the screen. Don’t use any type of ink pen, as the ink may be
impossible to remove. See “Caring For The netpad” on page 18 for
instructions on how to clean the screen. You can usually tap on
(“click on”) an item with the stylus to select or change it. For exam-
ple, you can:
• Double-tap (or double-click) a program icon, to open
a program.
• Single-tap (or left-click) the soft keys, for “short-cuts” to
system functions.
• Tap-and-hold to right-click. Right-clicking can interrupt the
functionality of other tap-and-hold items, such as scrollbars.
Note: If the screen doesn’t respond to your taps, you may need to
re-calibrate it. You can do this by holding down the On/Off
button for 4 seconds.