User manual

48 Psion Teklogix netpad Windows CE .NET 4.2 Quick Start Guide
2.10 The Scanner
Where fitted with a bar code scanner, the netpad may be used to read
industry standard bar codes. To scan a bar code, point the scanner
window at the bar code, ensuring that the scanner window is not
obstructed and that you are between 5 cm (2 in.) and 60 cm (24 in.)
from the bar code. Activate the scanner as instructed in the software
application’s operating instructions. The scanning beam should be
energized until a successful decode is achieved or three seconds have
elapsed. For detailed information on bar codes, scanner properties, and
configuration, please refer to the netpad User Manual.
Figure 2.23 Scanner Location
Warning: For your own safety, it is critical that you comply with
the following warnings:
1. Do not look into the scanner window.
2. This product contains a laser scanner that emits less
than 1.2 mW average radiant power at a wavelength
of 650 nm. This product complies with 21 CFR
Scanner Window