User's Manual
Table Of Contents
- Introduction 1
- Basic Checkout 2
- Getting To Know Your Ikôn 3
- Working With Windows CE 5.0 4
- Configuration 5
- 5.1 Remote Desktop Connection
- 5.2 The TekTerm Application
- 5.3 The Control Panel
- 5.4 Control Panel Icons
- 5.5 Basic Setup
- 5.6 Bluetooth
- 5.7 Total Recall
- 5.8 TweakIT
- 5.9 Error Reporting
- 5.10 Teklogix Error Handling Service
- 5.11 The Storage Manager
Chapter 5: Configuration
Stylus Properties
Ikôn Rugged PDA (Windows CE 5.0) User Manual 105
5.5.6 Stylus Properties
•In the Control Panel, choose the Stylus icon.
5.5.6.1 Double-Tap
•In the Double-Tap menu, follow the directions to tailor the sensitivity of the stylus when
you tap on the touchscreen.
5.5.6.2 Calibration
Touchscreens rarely require recalibration. However, if your touchscreen has never been cal-
ibrated or if you find that the stylus pointer is not accurate when you tap on an item, follow
the directions below.
Note: Touchscreen calibration may not be enabled on your unit. If your screen appears to
require recalibration, contact your supervisor.