User's Manual
Table Of Contents
- Introduction 1
- Basic Checkout 2
- Getting To Know Your Ikôn 3
- Working With Windows CE 5.0 4
- Configuration 5
- 5.1 Remote Desktop Connection
- 5.2 The TekTerm Application
- 5.3 The Control Panel
- 5.4 Control Panel Icons
- 5.5 Basic Setup
- 5.6 Bluetooth
- 5.7 Total Recall
- 5.8 TweakIT
- 5.9 Error Reporting
- 5.10 Teklogix Error Handling Service
- 5.11 The Storage Manager
Chapter 5: Configuration
Bluetooth Setup
116 Ikôn Rugged PDA (Windows CE 5.0) User Manual
5.6.1.3 Servers
When the Bluetooth connection is initiated from your Ikôn to the remote device, the Ikôn is
called the ‘client’ and the remote is called the ‘server’. The Servers menu displays the server
profiles that can be activated in your Ikôn. There is currently one server profile available:
Serial.
• Tap on the checkbox to activate the server, and it will display the associated port name
beside the server name.
Once you activate a server profile, it is recommended that the Ikôn be rebooted before you
try to bond from a server.
5.6.1.4 Outgoing
Note: You do not need to reboot if you are deactivating a server.