User's Manual
Table Of Contents
- Introduction 1
- Basic Checkout 2
- Getting To Know Your Ikôn 3
- Working With Windows CE 5.0 4
- Configuration 5
- 5.1 Remote Desktop Connection
- 5.2 The TekTerm Application
- 5.3 The Control Panel
- 5.4 Control Panel Icons
- 5.5 Basic Setup
- 5.6 Bluetooth
- 5.7 Total Recall
- 5.8 TweakIT
- 5.9 Error Reporting
- 5.10 Teklogix Error Handling Service
- 5.11 The Storage Manager
Ikôn Rugged PDA (Windows CE 5.0) User Manual 7
BASIC CHECKOUT 2
2.1 Features Of The Ikôn Rugged PDA...........................9
2.2 Preparing The Ikôn Rugged PDA For Operation . ..................11
2.2.1 The Battery..................................11
2.3 Turning The Ikôn On And Off.............................11
2.3.1 Installing The Battery ............................11
2.3.2 Switching The Ikôn On. . . .........................11
2.3.3 Switching The Ikôn Off . . .........................12
2.4 Calibrating The Touchscreen..............................13
2.5 Configuring The Summit 802.11b/g..........................13
2.5.1 Summit Client Utility (SCU) For 802.11b/g Radio . ............14
2.5.2 Assigning The IP Address..........................14
2.5.3 Name Servers Tab..............................16
2.5.4 Using The SCU To Connect To The WLAN.................17
2.5.4.1 SSID.................................18
2.5.4.2 EAP Type..............................18
2.5.4.3 Encryption..............................18
2.6 Checking The Scanner.................................19
2.7 Data Transfer Between The PC And The Ikôn.....................19
2.7.1 Using Microsoft ActiveSync.........................20
2.7.2 Using Windows Vista ............................20
2.9 Resetting The Ikôn...................................26
2.9.1 Performing A Cold Reset...........................27
2.9.2 Performing A Warm Reset..........................27