User's Manual
Table Of Contents
- Introduction 1
- Basic Checkout 2
- Getting To Know Your Ikôn 3
- Working With Windows CE 5.0 4
- Configuration 5
- 5.1 Remote Desktop Connection
- 5.2 The TekTerm Application
- 5.3 The Control Panel
- 5.4 Control Panel Icons
- 5.5 Basic Setup
- 5.6 Bluetooth
- 5.7 Total Recall
- 5.8 TweakIT
- 5.9 Error Reporting
- 5.10 Teklogix Error Handling Service
- 5.11 The Storage Manager
Chapter 2: Basic Checkout
Assigning The IP Address
Ikôn Rugged PDA (Windows CE 5.0) User Manual 15
3. Tap on the IP Information tab.
4. To define a static IP address, tap on the Configure button. The Summit WLAN
Adapter Settings menu provides two options:
• Tap on Obtain an IP address via DHCP to have an address assigned
automatically, or
• If you want to use a particular IP address, tap on Specify an IP address, and type the
preferred address as well as the IP, Subnet Mask and Default Gateway addresses in
the appropriate fields. Tap OK to save your information.
Note: Choosing the Renew button forces the Ikôn to renew or find a new IP address. This
is useful if, for example, you are out of communication range for a longer period of
time and your Ikôn is dropped from the network.