User's Manual
Table Of Contents
- Introduction 1
- Basic Checkout 2
- Getting To Know Your Ikôn 3
- Working With Windows CE 5.0 4
- Configuration 5
- 5.1 Remote Desktop Connection
- 5.2 The TekTerm Application
- 5.3 The Control Panel
- 5.4 Control Panel Icons
- 5.5 Basic Setup
- 5.6 Bluetooth
- 5.7 Total Recall
- 5.8 TweakIT
- 5.9 Error Reporting
- 5.10 Teklogix Error Handling Service
- 5.11 The Storage Manager
Chapter 2: Basic Checkout
Performing A Cold Reset
Ikôn Rugged PDA (Windows CE 5.0) User Manual 27
During a warm reset:
• Running programs are halted, and any unsaved data in them is lost.
• The contents of flash memory, including the registry, custom settings and user-added
programs, are retained.
• The OS is reloaded from saved settings.
• The contents of RAM are preserved.
You can perform a warm or cold reset by choosing those options in the Shutdown menu, or
follow the directions below.
2.9.1 Performing A Cold Reset
To execute a cold reset:
• Press and hold down the [ENTER] key and the Power button simultaneously for a
minimum of four seconds.
You will need to press the Power button to turn the Ikôn back on.
2.9.2 Performing A Warm Reset
To execute a warm reset:
• Press and hold down the [BLUE] key and the [ENTER] key simultaneously for a
minimum of four seconds.
A warm reset closes open applications; any unsaved data are lost. Installed programs and
saved data are preserved. The Ikôn automatically reboots.
Important: A cold reset returns the Ikôn to factory settings.
Note: You do not need to reset your Ikôn after configuring the radio.