User's Manual
Table Of Contents
- Introduction 1
- Basic Checkout 2
- Getting To Know Your Ikôn 3
- Working With Windows CE 5.0 4
- Configuration 5
- 5.1 Remote Desktop Connection
- 5.2 The TekTerm Application
- 5.3 The Control Panel
- 5.4 Control Panel Icons
- 5.5 Basic Setup
- 5.6 Bluetooth
- 5.7 Total Recall
- 5.8 TweakIT
- 5.9 Error Reporting
- 5.10 Teklogix Error Handling Service
- 5.11 The Storage Manager
Chapter 3: Getting To Know Your Ikôn
Ikôn Rugged PDA Indicators
Ikôn Rugged PDA (Windows CE 5.0) User Manual 39
•In the Control Panel, choose the Stylus icon to display the Stylus Properties window.
Figure 3.3 Stylus Icon
• Select the Calibration tab, and then choose the Recalibrate button.
Figure 3.4 Calibration Screen
• Follow the directions on the calibration screen to calibrate the screen.
3.4 Ikôn Rugged PDA Indicators
The Ikôn uses LEDs (Light Emitting Diodes), onscreen messages and audio tones to indi-
cate the various conditions of the PDA, the batteries, the scans and so on.