User's Manual

Chapter 5: Configuration
Configuring The Bar Code Decoding Symbology Presets
Ikôn Rugged PDA (Windows CE 5.0) User Manual 149
6. For a parameter that toggles between two values:
• Select the parameter and then press the [S
PACE] key, or
• Double-click the parameter.
7. When you have completed all the changes, do one of the following:
•Click OK to exit to the parameter list and save the changes, or
• Click the Close button to exit to the parameter list without saving the changes.
8. The parameter list is displayed; the new value for the changed parameter is shown.
9. When you have completed all the changes, do one of the following:
•Click OK to exit to the preset list and save the changes, or
• Click the Close button to exit to the preset list without saving the changes.
5.13.2.6 Removing A Custom Preset
To remove a custom preset do the following:
1. Select a custom preset.
2. Click Remove.
The following window opens:
3. Do one of the following:
•Click Yes to delete the custom preset and exit to the preset list, or
•Click No to exit to the preset list without deleting the custom preset.
5.13.3 Configuring The Bar Code Decoding Symbology Presets
To configure the bar code decoding symbology presets, open the dialog box as follows:
• In Control Panel, select Teklogix Imagers and then click the Barcoding tab.