User's Manual

Chapter 5: Configuration
Configuring The Bar Code Decoding Symbology Presets
Ikôn Rugged PDA (Windows CE 5.0) User Manual 153
i. Select the parameter and then press the [SPACE] key, or double-click the parameter.
ii. A dialog box —containing the valid range of values for the parameter and the current
setting—similar to the following opens:
iii. Type the new value for the parameter into the box.
6. For a parameter that toggles between two values:
• Select the parameter and then press the [S
PACE] key, or
• Double-click the parameter.
7. When you have completed all the changes, do one of the following:
•Click OK to exit to the parameter list and save the changes, or
• Click the Close button to exit to the parameter list without saving the changes.
8. The parameter list is displayed; the new value for the changed parameter is shown.
9. When you have completed all the changes, do one of the following:
•Click OK to exit to the preset list and save the changes, or
• Click the Close button to exit to the preset list without saving the changes.
5.13.3.6 Removing A Custom Preset
To remove a custom preset do the following:
1. Select a custom preset.
2. Click Remove.