User's Manual
Table Of Contents
- Peripheral Devices & Accessories 6
- 6.1 Carrying Accessories
- 6.2 The Battery
- 6.3 Adaptor Cable Options
- 6.4 Chargers And Docking Stations: General Information
- 6.5 CH4000 Desktop Docking Station
- 6.5.4 Cleaning The CH4000
- 6.5.5 Troubleshooting
- 6.5.5.1 Docking Station Does Not Seem To Power On.
- 6.5.5.2 The Ikôn Charge Indicator LED Stays Off.
- 6.5.5.3 The Ikôn Charge Indicator LED Is Fast Flashing Green.
- 6.5.5.4 Spare Battery LED Fast Flashes Green With A Battery Installed.
- 6.5.5.5 Spare Battery LED Does Not Turn On When A Battery Is Installed.
- 6.7 AC Wall Adaptor: Model No. PS1050 - G1
- 6.8 Automotive Power Adaptor: Model No. CH3050
- 6.9 The CH1000 Non-Powered Vehicle Cradle
- 6.10 The CH1005A Powered Vehicle Cradle
- 6.11 Scanners And Imagers
- 6.12 Bluetooth Peripherals
- Specifications 7
Chapter 6: Peripheral Devices & Accessories
Attaching The Handstrap With Tether (Model No. CH6021)
214 Ikôn Rugged PDA (Windows CE 5.0) User Manual
3. Slide the bracket through the plastic loop on the handstrap and install the screws.
4. Adjust the handstrap by pulling up the Velcro tab and readjusting to your hand
as needed.
Attaching The Stylus Tether To The Handstrap
The stylus tether can be attached to the handstrap at the back of the Ikôn.
1. If not assembled, thread the tether cord through the stylus as shown, pulling the
cord tight.