User's Manual
Table Of Contents
- Peripheral Devices & Accessories 6
- 6.1 Carrying Accessories
- 6.2 The Battery
- 6.3 Adaptor Cable Options
- 6.4 Chargers And Docking Stations: General Information
- 6.5 CH4000 Desktop Docking Station
- 6.5.4 Cleaning The CH4000
- 6.5.5 Troubleshooting
- 6.5.5.1 Docking Station Does Not Seem To Power On.
- 6.5.5.2 The Ikôn Charge Indicator LED Stays Off.
- 6.5.5.3 The Ikôn Charge Indicator LED Is Fast Flashing Green.
- 6.5.5.4 Spare Battery LED Fast Flashes Green With A Battery Installed.
- 6.5.5.5 Spare Battery LED Does Not Turn On When A Battery Is Installed.
- 6.7 AC Wall Adaptor: Model No. PS1050 - G1
- 6.8 Automotive Power Adaptor: Model No. CH3050
- 6.9 The CH1000 Non-Powered Vehicle Cradle
- 6.10 The CH1005A Powered Vehicle Cradle
- 6.11 Scanners And Imagers
- 6.12 Bluetooth Peripherals
- Specifications 7
Chapter 6: Peripheral Devices & Accessories
Important Instructions
Ikôn Rugged PDA (Windows CE 5.0) User Manual 233
Figure 6.10 CH1000 Vehicle Cradle
6.9.1 Important Instructions
The CH1000 storage temperature is -40°C to +70°C (-40°F to 158°F). Operating humidity
and temperature is 5 - 95% non-condensing and -30°C to 60°C (-22°F to 140°F).
6.9.2 Vehicle Cradle Operation
6.9.2.1 Operator Controls
The vehicle cradle has no operator controls or power switch.
6.9.2.2 Indicators
The CH1000 has no front indicators. The Ikôn LED serves as the power indicator.
6.9.2.3 Placing The Ikôn In The Vehicle Cradle
Connect the vehicle power to the Ikôn prior to inserting it in the vehicle cradle.
The vehicle cradle is designed with a front opening through which you can pass the con-
nected cable while inserting the Ikôn (see Figure 6.10).
When placing the Ikôn into the vehicle cradle, press firmly on the top of the PDA and the
Ikôn will bottom out on the cradle base. This action will make the final fit to the cradle base
to allow the rear restraining mechanism to resist vibration.
Restraining Mechanisms
Stylus Well
Cable Tidy
Cable Pass-thru