User's Manual Part 3
Table Of Contents
- Programs 6
- Specifications 8
- 8.1 iKôn PDA Specifications (Model No. 7505)
- 8.2 Radio Specifications
- 8.3 Lithium-Ion 5000 mAh Battery Specifications - Model No. ??
- 8.4 Scanner/Imager Model Numbers
- 8.5 Scanner Specifications
- A.1 SCU Tabs
- A.2 Main Tab
- A.3 Config Tab
- A.4 Global Settings Tab
- A.5 Status Tab
- A.6 Diags Tab
- B.1 Dock Interface Connector Pinout
- B.2 Desktop Dock Spare Battery Charger Connector Pinout
- B.3 Battery Contact Pinout
- Index
iKôn Rugged PDA (Windows Mobile 6) User Manual B-1
APPENDIX B
PORT PINOUTS
B.1 Dock Interface Connector Pinout
PIN # Signal Name Type Description
1 Ground Reference Ground Connects to Dock Ground
2 External DC Power Power Input Terminal Dock Power
3 External DC Power Power Input Terminal Dock Power
4 External DC Power Power Input Terminal Dock Power
5 Battery Power Out Output from Terminal Not used in Dock
6 Audio (Inverted) Output from Terminal Not used in Dock
7 Audio (Non-inverted) Output from Terminal Not used in Dock
8 USB OTG Power Input to Terminal From USB B connector
9 Docking Identification Bi-directional Terminal comms with
Dock
10 USB OTG Data Negative Bi-directional USB Data line
11 USB OTG Data Positive Bi-directional USB Data Line
12 USB OTG Identification Input to Terminal Dock identifies whether A
or B connector is being
used
13 Ground Reference Ground Connects to Dock Ground
14 RS232 Transmit Serial TX Not used in Dock
15 RS232 Receive Serial RX Not used in Dock
16 Ground Reference Ground Connects to Dock Ground