User's Manual Part 3
Table Of Contents
- Programs 6
- Specifications 8
- 8.1 iKôn PDA Specifications (Model No. 7505)
- 8.2 Radio Specifications
- 8.3 Lithium-Ion 5000 mAh Battery Specifications - Model No. ??
- 8.4 Scanner/Imager Model Numbers
- 8.5 Scanner Specifications
- A.1 SCU Tabs
- A.2 Main Tab
- A.3 Config Tab
- A.4 Global Settings Tab
- A.5 Status Tab
- A.6 Diags Tab
- B.1 Dock Interface Connector Pinout
- B.2 Desktop Dock Spare Battery Charger Connector Pinout
- B.3 Battery Contact Pinout
- Index
Chapter 5: Settings
Decoded
158 iKôn Rugged PDA (Windows Mobile 6) User Manual
5.28.2.14Interleaved 2 of 5
Enabled
Set this parameter to on to enable “Interleaved 2 of 5”.
Reading Range
This parameter determines the reading distance from which a bar code can be successfully
scanned. The default setting, Extended, allows for increased
reading distance.
Check Digit Verification
The available options for this parameter are Disabled, MOD 10 Check and French CIP.
“Check Digit Verification” uses the specified algorithm of the option you've chosen to
ensure the integrity of the symbol data before transmitting. If the data does not contain that
algorithm, the data is not transmitted.
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Set Length L1, Set Length L2, And Set Length L3
Lengths for “Interleaved 2 of 5” can be set from 0 to 255. The length of a code
refers to the number of characters (i.e., human readable characters), including
check digit(s).
Double-tapping on these parameters displays dialog boxes where you can define the code
length that will be recognized by your scanner.
Length Mode
You can chose to set L1 as Minimum Length or L1,L2,L3 as Fixed Length.
Field Size/Char
Refer to page 137 for details.
5.28.2.15Matrix 2 of 5
Enabled
Set this parameter to on to enable “Matrix 2 of 5”.
Note: French CIP (French pharmaceutical) is only used with bar codes containing 7
characters.