User's Manual Part 3
Table Of Contents
- Programs 6
- Specifications 8
- 8.1 iKôn PDA Specifications (Model No. 7505)
- 8.2 Radio Specifications
- 8.3 Lithium-Ion 5000 mAh Battery Specifications - Model No. ??
- 8.4 Scanner/Imager Model Numbers
- 8.5 Scanner Specifications
- A.1 SCU Tabs
- A.2 Main Tab
- A.3 Config Tab
- A.4 Global Settings Tab
- A.5 Status Tab
- A.6 Diags Tab
- B.1 Dock Interface Connector Pinout
- B.2 Desktop Dock Spare Battery Charger Connector Pinout
- B.3 Battery Contact Pinout
- Index
Chapter 5: Settings
Options Tab
172 iKôn Rugged PDA (Windows Mobile 6) User Manual
5.28.4 Options Tab
This tab allows you to tailor the double-click parameters and the display options associated
with your scanner.
5.28.4.1 Double Click Parameters
Click
Time (msec)
This parameter controls the maximum gap time (in milliseconds) for a double-click. If the
time between the first and second clicks of the scanner trigger is within this time, it is con-
sidered a double-click. The allowable range is 0 to 1000. A value of zero disables this
feature.
A double-click produces different results depending on whether or not a value is assigned in
the “Click Data” parameter. When a value is not assigned for the “Click Data”, double-click-
ing the scanner trigger overrides the target dot delay set in the “Dot Time” parameter and
initiates a normal scan sweep. If a value is assigned for the “Click Data” parameter, double-
clicking the scanner trigger inserts the “Click Data” value rather than initiating a scan.
Click Data
For both integrated and external scanners, this parameter determines which character is sent
to the application installed in your PDA following a double-click. A dialog box appears,
asking that you press the key you want to insert. The ASCII/Unicode key value of the key-
press is displayed.