User's Manual Part 3
Table Of Contents
- Programs 6
- Specifications 8
- 8.1 iKôn PDA Specifications (Model No. 7505)
- 8.2 Radio Specifications
- 8.3 Lithium-Ion 5000 mAh Battery Specifications - Model No. ??
- 8.4 Scanner/Imager Model Numbers
- 8.5 Scanner Specifications
- A.1 SCU Tabs
- A.2 Main Tab
- A.3 Config Tab
- A.4 Global Settings Tab
- A.5 Status Tab
- A.6 Diags Tab
- B.1 Dock Interface Connector Pinout
- B.2 Desktop Dock Spare Battery Charger Connector Pinout
- B.3 Battery Contact Pinout
- Index
Chapter 5: Settings
Managing An Existing Connection
iKôn Rugged PDA (Windows Mobile 6) User Manual 197
• In Host name/IP, type the VPN server name or IP address.
• Tap on the VPN type radio button next to the type of authentication for your iKôn PDA:
IPSec/L2TP or PPTP. Your network administrator will let you know which option
applies to your unit.
• Tap on Next.
• Choose the type of authentication in this screen. If you choose A pre-shared key, type
the key provided by your network administrator.
• Tap on Next.
• Type your user name, password and domain name. If a domain name was not pro-
vided to you, try the connection without entering a domain name.
If you need to edit the Advanced settings, refer to “Advanced Modem Settings” on page 192
for details about this tab.
• Tap on Finish.
• Launch a program like Internet Explorer to activate the connection. The VPN connec-
tion will start automatically.
5.34.6 Managing An Existing Connection
Once you’ve defined a connection, a new option appears in the first Connections screen–
Manage existing connections.
5.34.6.1 Editing A Connection
• Tap on Settings>Connections tab. Tap on the Connections icon.
Note: Normally, you will not need to change any advanced settings. You will need to make
changes only under only the following circumstances:
The server to which you are connecting does not dynamically assign addresses, and
TCP/IP settings need to be entered.
Server DNS or WINS settings need to be changed.