User's Manual Part 3

Appendix A: Summit Client Utility (SCU)
Config Tab
iKôn Rugged PDA (Windows Mobile 6) User Manual A-3
The following table describes the options in the Radio Attributes dropdown menu:
Radio
Attributes
Description Value Default
Config Name of config (configuration
profile). Use Rename button to
change name.
Maximum of 32 characters. None
SSID Service set identifier (SSID) for
WLAN to which the radio con-
nects.
Maximum of 32 characters. None
Client Name Name assigned to radio & iKôn
PDA into which it is installed.
Maximum of 16 characters. None
Power Save Power save mode for radio. CAM: Constantly awake.
Maximum: Maximum power
savings.
Fast: Fast power save mode.
Fast
Tx Power Maximum transmit power. Max: Maximum defined for
current regulatory domain.
Measured in mW: 50,30,10, 1.
Max
Bit Rate Used by radio when interacting
with WLAN access point.
Auto: Rate automatically nego-
tiated with access point.
Rates in Mbps: 1, 2, 5.5, 6.9 11,
12, 18, 24, 36, 48, 54.
Auto
Radio Mode Used by 802.11g when interacting
with access point.
B rates only: 1, 2, 5.5, & 11
Mbps.
G rates only: 6, 9, 12, 18, 24, 36,
48, and 54 Mbps.
BG rates full: All B and G rates.
BG rates optimized: 1, 2, 5.5, 6,
11, 24, 36 & 54 Mbps.
BG rates
optimized
Auth Type 802.11 authentication type used
when associating with access
point.
Open, shared-key, or LEAP
(Network-EAP).
Open
EAP Type Extensible Authentication Proto-
col type used for 802.1X authenti-
cation to access point.
None, LEAP, EAP-FAST,
PEAP-MSCHAP
– To use EAP-TLS, you must
use WZC.
None