User's Manual Part 3
Table Of Contents
- Programs 6
- Specifications 8
- 8.1 iKôn PDA Specifications (Model No. 7505)
- 8.2 Radio Specifications
- 8.3 Lithium-Ion 5000 mAh Battery Specifications - Model No. ??
- 8.4 Scanner/Imager Model Numbers
- 8.5 Scanner Specifications
- A.1 SCU Tabs
- A.2 Main Tab
- A.3 Config Tab
- A.4 Global Settings Tab
- A.5 Status Tab
- A.6 Diags Tab
- B.1 Dock Interface Connector Pinout
- B.2 Desktop Dock Spare Battery Charger Connector Pinout
- B.3 Battery Contact Pinout
- Index
Chapter 5: Settings
Bluetooth Mode
iKôn Rugged PDA (Windows Mobile 6) User Manual 185
5.32.2 Bluetooth Mode
•Tap Start>Settings. Tap on the Connections tab>Bluetooth icon and then tap on the
Mode tab.
When Turn on Bluetooth is enabled (a checkmark is displayed in the checkbox), Bluetooth
features are available. If this option is disabled, you cannot send or receive information
using Bluetooth.
When Make this device visible to other devices is enabled, other Bluetooth devices within
range (approximately 10 meters) can detect your iKôn PDA and can establish a bond or use
a Bluetooth service. Note that other devices can detect your unit whether or not a bond has
been created.
5.32.3 Bluetooth COM Ports