User's Manual Part 3
Table Of Contents
- Programs 6
- Specifications 8
- 8.1 iKôn PDA Specifications (Model No. 7505)
- 8.2 Radio Specifications
- 8.3 Lithium-Ion 5000 mAh Battery Specifications - Model No. ??
- 8.4 Scanner/Imager Model Numbers
- 8.5 Scanner Specifications
- A.1 SCU Tabs
- A.2 Main Tab
- A.3 Config Tab
- A.4 Global Settings Tab
- A.5 Status Tab
- A.6 Diags Tab
- B.1 Dock Interface Connector Pinout
- B.2 Desktop Dock Spare Battery Charger Connector Pinout
- B.3 Battery Contact Pinout
- Index
Chapter 5: Settings
Establishing A Connection
iKôn Rugged PDA (Windows Mobile 6) User Manual 203
Signal strength is between 81% and 100%.
A GPRS packet data connection is active.
CDMA/1xRTT
Signal strength is between 1% and 20%.
Signal strength is between 21% and 40%.
Signal strength is between 41% and 60%.
Signal strength is between 61% and 80%.
Signal strength is between 81% and 100%.
A CDMA/1xRTT packet data connection is active.
5.36.2 Establishing A Connection
• Tap on Start>Settings. Tap on the System tab followed by the Wireless WAN icon.
The Status field indicates when the unit is ready to connect–the Connect Data button is
enabled.
• Tap on the Connect Data button.
The progress of the connection is tracked in the Status field.
Note: If you are prompted to enter a PIN, refer to “Entering A PIN” on page 204
for details.