User's Manual Part 3

140 iKôn Rugged PDA (Windows Mobile 6) User Manual
Chapter 5: Settings
Decoded (Internal) Scanners
UPC E
UPC-A, Preamble
When you double-tap on this parameter, a dialog box is displayed where you can choose one
of three options for lead-in characters for UPC-A symbols transmitted to the host device:
System Char – system character transmitted with the data, Country code and System Char –
both the country code (“0” for USA) and system character are transmitted with the data or
None – no preamble is transmitted. The lead-in characters are considered part of the symbol.
Prefix/Suffix Chars
Refer to page 137 for details.
5.28.1.12UPC E
Enabled UPC-E
Set this parameter to on to allow “UPC E” bar code scans.
Enabled UPC-E1
Set this parameter to on to allow “UPC-E1” (zero suppressed) bar code scans.
UPC-E And UPC-E1 Check Digit
If you enable one or both of these parameters, a check digit is included with the decoded bar
code data.
UPC-E And UPC-E1 Preamble
When you double-tap on one of these parameters, a dialog box is displayed where you can
choose one of three options for lead-in characters for UPC-E and UPC-E1 symbols transmit-
ted to the host device: System Char – system character transmitted with the data, Country
code and System Char – both the country code (“0” for USA) and system character are
transmitted with the data or None – no preamble is transmitted. The lead-in characters are
considered part of the symbol.
Conv. UPC-E To UPC-A
This parameter converts UPC-E (zero suppressed) decoded data to UPC-A format before
transmission. After conversion, data follows UPC-A format and is affected by UPC-A pro-
gramming selections (e.g., Preamble, Check Digit).
Conv. UPC-E1 To UPC-A
This parameter converts UPC-E1 (zero suppressed) decoded data to UPC-A format before
transmission. After conversion, data follows UPC-A format and is affected by UPC-A pro-
gramming selections (e.g., Preamble, Check Digit).