User's Manual Part 3
Table Of Contents
- Programs 6
- Specifications 8
- 8.1 iKôn PDA Specifications (Model No. 7505)
- 8.2 Radio Specifications
- 8.3 Lithium-Ion 5000 mAh Battery Specifications - Model No. ??
- 8.4 Scanner/Imager Model Numbers
- 8.5 Scanner Specifications
- A.1 SCU Tabs
- A.2 Main Tab
- A.3 Config Tab
- A.4 Global Settings Tab
- A.5 Status Tab
- A.6 Diags Tab
- B.1 Dock Interface Connector Pinout
- B.2 Desktop Dock Spare Battery Charger Connector Pinout
- B.3 Battery Contact Pinout
- Index
Chapter 5: Settings
Modem Connection Setup
192 iKôn Rugged PDA (Windows Mobile 6) User Manual
9. Tap on the Finish button.
If you need to edit the Advanced settings, refer to “Advanced Modem Settings” in the next
section.
5.33.1.1 Advanced Modem Settings
TCP/IP Settings Tab
If your server assigns IP addresses dynamically, you will not need to change these settings.
If you need to make changes, contact your ISP or network administrator for addresses.
Note: Generally, you will not need to change any of the Advanced settings.
For information about the Advanced settings, refer to“Advanced Modem Settings”
Changes to Advanced settings are only required in the following instances:
To change the baud rate settings, dialing string commands or credit
card options.
To change port settings.
To enter TCP/IP settings because the server to which you are connecting does not
dynamically assign addresses.