User's Manual

Table Of Contents
Chapter 5: Settings
Teklogix Imagers Settings
EP10 Hand-Held (Windows Embedded 6.5) User Manual 149
5.32 Teklogix Imagers Settings
The Teklogix Imagers applet is used to create, modify, delete and activate imager settings.
The principle uses of the applet are to decode bar codes and to capture images.
To launch this applet:
Tap on Start>Settings>System tab, and then tap on the Teklogix Imagers icon.
A PTSI Imager demo applet is also provided to illustrate how the imager works.
Note: This icon is only when displayed when the HHP 5000 imager is installed in your
EP10 hand-held.
Important: Refer to Appendix D: “Teklogix Imagers Applet” for details about this
applet.
Preliminary Draft