User's Manual

10 EP10 Hand-Held Computer & Accessories Regulatory & Warranty Guide
• Do not operate the charging device if it has received a sharp
blow, been dropped, or otherwise damaged in any way; it
should be inspected by qualified service personnel.
• Do not disassemble the charging device; it should be repaired
by qualified service personnel. Incorrect reassembly may
result in electric shock or fire.
• To reduce risk of electric shock, unplug the charging device
from the outlet before attempting any maintenance or clean-
ing.
• An extension cord should not be used unless absolutely nec-
essary. Use of an improper extension cord could result in fire
or electric shock. If an extension cord must be used, make
sure:
- The plug pins on the extension cord are the same number,
size, and shape as those on the charging device.
- The extension cord is properly wired and in good electrical
condition and that the wire size is larger than 16 AWG.
• For indoor use only. Do not expose the charging device to rain
or snow.
• Do not connect the Ethernet port of the accessory to outdoor
cables.
• Do not use the charging device if, after an overnight charge,
any of the batteries feel warmer than the charging device
housing. The charging device should be inspected by qualified
service personnel.
Draft #3