User's Manual

Table Of Contents
Chapter 5: Settings
Bar Code Settings – The Scanner Menu
EP10 Hand-Held (Windows Embedded 6.5) User Manual 151
Tap on Start>Settings, and then tap on the System tab followed by the Tek lo gix
Scanner icon.
5.33.1 Bar Code Settings – The Scanner Menu
The drop-down menu to the right of the Scanner option allows you to choose from one of
the following scanner types used with your EP10: Decoded (internal), Decoded (Intermec
ISCP) or Imager.
The symbologies listed change to reflect the scanner you choose and the bar codes
it supports.
Important: Appendix C: “Bar Codes Settings” provides descriptions of the bar codes
listed in the scanner menus.
Preliminary Draft