User's Manual

Table Of Contents
Chapter 5: Settings
Ports Tab
158 EP10 Hand-Held (Windows Embedded 6.5) User Manual
5.33.4.1 Port Replicator Port A (COM5:)
Enabled
This parameter allows you to turn this port on (enable) and off.
Baud
Double-tapping on this parameter displays a pop-up window in which you can choose an ap-
propriate baud rate.
Data Bits
This parameter determines the number of data bits included in each asynchronous data byte.
Most devices use 8 bit data bytes. Double-tapping on this option displays a pop-up window
in which you can choose either 7 or 8 data bits.
Preliminary Draft