User's Manual

Table Of Contents
Chapter 5: Settings
Ports Tab
EP10 Hand-Held (Windows Embedded 6.5) User Manual 159
Parity
This parameter determines the type of parity checking used on the data going through the
tether port. Double-tapping on this option displays a pop-up window in which you can
choose the appropriate Parity.
Stop Bits
This parameter specifies the number of stop bits – 1, 1.5, 2 – used for asynchronous
communication.
Trigg er On Sequen ce And Trigge r Off Seque nce
If a SICK scanner connected to the EP10 port requires a serial stream of data bytes to trigger
the scanner on and another to trigger the scanner off, the Trigger On Sequence and Trigger
Off Sequence parameters allow you to define these serial streams.
Preliminary Draft