User's Manual

Table Of Contents
Chapter 5: Settings
Port Settings
EP10 Hand-Held (Windows Embedded 6.5) User Manual 183
5.40.1 Port Settings
Baud Rate
In the Baud rate drop-down menu, choose a new baud rate. Check your modem documen-
tation for the appropriate baud rate.
Data Bits
This parameter determines the number of bits for the data going through this port. Possible
values are: 4, 5, 6, 7, 8.
Parity
This parameter determines the type of parity checking used on the data going through the
port. The options are: none, odd, even, mark and space.
Stop Bits
This parameter specifies the number of stop bits – 1, 1.5, 2 – used for asynchronous
communication.
Flow Control
This parameter selects the type of flow control used in your hand-held. The EP10 can
perform Software or Hardware handshaking, or you can choose None.
Preliminary Draft