User's Manual

Table Of Contents
Chapter 5: Settings
Network Adaptor Cards
EP10 Hand-Held (Windows Embedded 6.5) User Manual 191
Tap on the Network Cards icon.
If you need to specify server information, double-tap on the appropriate adaptor, and
then tap on the IP Address and/or Name Servers tab.
If necessary, use a network cable to connect the network card to your network. Refer to
the documentation shipped with your network card for details.
To activate the connection, launch the desired program (e.g., Internet Explorer). The
EP10 will connect automatically.
Note: Because most networks use DHCP, you should not need to change these settings
unless instructed to do so by your network administrator.
Preliminary Draft