User's Manual

Table Of Contents
Chapter 5: Settings
Establishing a Connection
198 EP10 Hand-Held (Windows Embedded 6.5) User Manual
A GPRS packet data connection is active.
CDMA/1xRTT
Signal strength is between 1% and 20%.
Signal strength is between 21% and 40%.
Signal strength is between 41% and 60%.
Signal strength is between 61% and 80%.
Signal strength is between 81% and 100%.
A CDMA/1xRTT packet data connection is active.
5.44.2 Establishing a Connection
Tap on Start>Settings. Tap on the System tab followed by the Wireless WAN icon.
The Status field indicates when the unit is ready to connect–the Connect Data button
is enabled.
Tap on the Connect Data button.
The progress of the connection is tracked in the Status field.
PPP link to modem active
Note: If you are prompted to enter a PIN, refer to “Entering a PIN” on page 199
for details.
Preliminary Draft