User's Manual

Table Of Contents
Chapter 6: Peripheral Devices & Accessories
Adaptor Cable Options
EP10 Hand-Held (Windows Embedded 6.5) User Manual 223
6.3 Adaptor Cable Options
The following are adaptors can be ordered for your EP10 (PN TBD):
6.4 Chargers and Docking Stations
Psion Teklogix offers a variety of chargers and docking stations for the EP10. These include:
Snap Modules are mobile adaptor designed for the EP10. Two models are available –
USB and Charge Snap Module, Model RV4001 and DE9 RS232 and Charge Snap
Module, Model RV4002.
AC Adaptor – Model PS1050 - G1 (AC Wall Adaptor Brick RV3055)
Vehicle Power Outlet Adaptor – Model RV3050
Desktop Docking Station – Model RV4000
Quad Docking Station – Model RV4004
Quad Charger – Model 3004
6.4.1 Important Safety Instructions
Before using the AC adaptor, Desktop Docking Station, Quad Charger, or Quad
Docking Station, read all instructions and markings on the housing.
Use the AC adaptor, batteries, and other attachments recommended or sold by Psion
Teklogix.
The mains power cord (sold separately) shall comply with the national safety regula-
tions of the country where the equipment is to be used.
These docking stations cannot be used with non-EP10 PDAs. Although they may share
the same battery terminating connector, they are designed with different applications
in mind.
Model Number Adaptor Cable Description
CA1033
Tether to USB Host.
CA1032
Tether to USB Device. (For ActiveSync)
WA4010 - G1 USB to Ethernet adaptor.
CH1050 Power cable used with quad docking station RV4004.
Important: Keep in mind when ordering a charger or docking station, you must also
order the appropriate power cord separately.
Preliminary Draft