User's Manual

Table Of Contents
Chapter 6: Peripheral Devices & Accessories
Cleaning the RV4000
228 EP10 Hand-Held (Windows Embedded 6.5) User Manual
Figure 6.5 RV4000 Desktop Docking Station Rear View
Linking an EP10 to a PC
The desktop docking station can be connected to a PC so that you can exchange files in the
same way that you would between PC drives. A USB cable is included with your
docking station.
To link the EP10 to a PC:
Insert the EP10 in the desktop docking station.
Insert the USB cable into the docking station Type B USB connector. Attach the other
end of the cable to a USB port on the PC.
6.5.4 Cleaning the RV4000
Typ e A U S B Por t
DC Jack
Sliding Door
DC JackSliding DoorType B USB Port
Note: For details about data transfer through Windows XP and ActiveSync and through
Vista, refer to “Data Transfer Between the PC & the EP10” on page 17.
Important: Do not immerse the unit in water. Dampen a soft cloth with mild detergent
to wipe the unit clean.
Preliminary Draft