User's Manual

Table Of Contents
Chapter 6: Peripheral Devices & Accessories
Cleaning the RV4004
232 EP10 Hand-Held (Windows Embedded 6.5) User Manual
Figure 6.7 RV4004 Quad Docking Station Rear View
Network Access
The EP10 automatically detects insertion into the docking station and loads the appropriate
drivers to communicate with the network.
Network Addressing
The host application uses standard TCP/IP protocol to name, locate and communicate with a
specific EP10 on the network.
If a link is established between an EP10 and a host, the application on the host and on the
EP10 must have a recovery mechanism in the event that the EP10 is removed from the dock,
interrupting the link.
6.6.4 Cleaning the RV4004
Use only mild detergent or soapy water on a slightly damp cloth to clean the RV4004.
Avoid abrasive cleaners, solvents or strong chemicals for cleaning. The plastic case is
susceptible to harsh chemicals. The plastic is partially soluble in oils, mineral spirits and
gasoline. The plastic slowly decomposes in strong alkaline solutions.
To clean ink marks from the label, use isopropyl alcohol.
RJ45 Ethernet Port
MINI FIT JR DC Input
Speed LED
Link LED
PLACE HOLDER
Important: Do not immerse the unit in water. Dampen a soft cloth with mild detergent
to wipe the unit clean.
Preliminary Draft