User's Manual

Table Of Contents
Chapter 6: Peripheral Devices & Accessories
The Non-Powered Vehicle Cradle – Model No. RV1000
238 EP10 Hand-Held (Windows Embedded 6.5) User Manual
Figure 6.9 Vehicle Power Outlet Adaptor
Insert the DC power plug into the DC IN port at the base of a snap module – Model No.
RV4001 or RV4002 (see TBD).
Insert the vehicle power outlet adaptor plug into the power outlet in your vehicle.
6.11 The Non-Powered Vehicle Cradle – Model No. RV1000
The RV1000 vehicle cradle is a passive device, designed to securely grip the EP10. The
cradle design permits access for the DC input cable to connect to the EP10 (see Figure 6.10
on page 239).
A stylus holder.
A loop for tethering the stylus.
A cable tidy for draping the power cables or storing the disconnected DC plug.
DC Power Plug
Vehicle Power
Adaptor Plug
Note: Shock and vibration specifications for the EP10 are verified using Psion Teklogix-
approved RAM mounts and mounting hardware. Use of non-certified Psion Teklogix
mounting hardware is not recommended, and may void warranty coverage.
Preliminary Draft