User's Manual

Table Of Contents
Chapter 6: Peripheral Devices & Accessories
The Powered Vehicle Cradle – Model No. RV1005
EP10 Hand-Held (Windows Embedded 6.5) User Manual 243
for the effects of the design, then we highly recommend using Psion Teklogix designed and
supported accessories.
If you elect to use a third party company produced cradle, Psion Teklogix cannot take re-
sponsibility for the effects of that third party product if it causes failure of our device.
Figure 6.12 RV1005A Front View
Important: Before using a vehicle cradle, read all instructions and markings on
the housing.
Do not operate a vehicle cradle if damaged by a sharp blow, dropped, or
otherwise damaged in any way; qualified service personnel should inspect
for internal damage.
Shock and vibration specifications for the EP10 are verified using Psion
Teklogix-approved RAM
®
mounts and mounting hardware. Use of non-
certified Psion Teklogix mounting hardware is not recommended, and may
void warranty coverage.
Do not expose to rain or snow! However, the Powered Vehicle Cradle is
designed to accept a wet EP10 handheld without harmful effect.
This Powered Vehicle Cradle cannot be used with non- EP10
cradle accessories.
Stylus Well
DC Power LED
Speaker
Docking
Connector
Latches
PLACE HOLDER
Preliminary Draft