User's Manual

Table Of Contents
Appendix A: Wireless Wide Area Network (WWAN)
Power Mode
EP10 Hand-Held (Windows Embedded 6.5) User Manual A-17
A.2 Power Mode
The power mode of the modem is controlled through the Power menu in the Control Panel
(not through the Wireless WAN user interface).
For CF Card modems, the settings are found under the Devices tab. If the checkbox for a
modem is unchecked, no power is applied to the modem and no driver is loaded (neither the
serial port driver nor the Wireless WAN driver). If the checkbox is checked, power is
applied to the modem and the drivers are loaded when the computer is turned on. Power is
removed from the modem when the computer enters suspend mode.
Preliminary Draft