User's Manual

Chapter 2: Getting to Know the EP10
Locking the Keyboard
16 EP10 Hand-Held (Windows Embedded 6.5) User Manual
2.3.2 Locking the Keyboard
You can lock the keyboard to prevent accidental key presses. To set up the locking/unlock-
ing key sequence:
• Tap on Start>Settings>Buttons. Tap on the right arrow icon in the bottom-right
corner of the screen to scroll to the Lock Sequence tab.
Refer to “Lock Sequence” on page 106 for details about setting up this function.
2.3.3 Modifier Keys
The [SHIFT], [CTRL], [ALT], and [BLUE] keys are modifier keys. Pressing a modifier key
changes the function of the next key pressed. For example, on a QWERTY keyboard, the
‘@’ symbol is printed in blue on the [A] key. Pressing the [BLUE] key, a modifier key, fol-
lowed by the [A] key displays the ‘@’ symbol rather than the letter A.
The [SHIFT], [CTRL] and [ALT] keys operate much like a desktop keyboard except that
they are not chorded (two keys held down simultaneously). The modifier key must be
pressed first followed by the key whose function you want modified.
2.3.3.1 Activating Modifier Keys & the Shift-State Indicator
When a modifier key is pressed, it is represented in the shift-state indicator icon in the
softkey bar at the bottom of the screen, making it easier to determine whether or not a modi-
fier key is active. If the shift-state indicator icon is not visible (you can only see the soft
keyboard icon), you may need to take a few steps to display the shift-state indicator icon.
• Tap on Start>Settings followed by the Buttons icon.
• Tap on the One Shots tab at the bottom of the screen.
• Tap in the check box next to Show modifier key state to display the shift-state
indicator icon.
Note: Almost all keys can be reprogrammed to suit your requirements.
Note: Keep in mind that the [ALT] and [CTRL] keys are only available on key-
pads that are not equipped with phone keys. You can, however, access the [CTRL]
key using the onscreen, soft keyboard.
Preliminary Draft