User's Manual

Table Of Contents
Chapter 2: Getting to Know the EP10
Aligning (Calibrating) the Touchscreen
20 EP10 Hand-Held (Windows Embedded 6.5) User Manual
2.4.3 Aligning (Calibrating) the Touchscreen
If your touchscreen has never been aligned (calibrated) or if you find that the stylus pointer
is not accurate when you tap on an item, follow the steps below.
Tap on Start>Settings. Tap on the System tab to display the Screen icon.
Tap on the Screen icon to display the Alignment tab.
Important: Keep in mind that this sequence cycles the display backlight up to full bright-
ness and once reached, begins to dim the backlight until the display fades to
black – nothing is visible. At this point, you’ll need to continue pressing these
keys until the display brightens up to a usable level.
Preliminary Draft